Wash the thermometer in a bowl of cool, soapy water (liquid soap can be used). Rinse thoroughly under clean running water. Use the thermometer immediately and then repeat the process after using the thermometer as well. Let the thermometer dry by air, on a clean paper towel before putting it away.
Also, can you clean an oral thermometer with hand sanitizer?
Sherman says hand sanitizers or disinfecting wipes can be used to clean a thermometer in a pinch. “While hand sanitizer often does the job, not all hand sanitizers contain at least 70-percent alcohol, which is the official recommendation for disinfecting thermometers,” he explains.
Consequently, can you sanitize a thermometer?
Dowse a cotton pad or ball with rubbing alcohol. You can also grab a bleach wipe. Coat the entire body of the thermometer with the disinfectant solution, making sure to rub it in thoroughly. Rinse the thermometer in cool running water to eliminate traces of alcohol.
How do I clean and sanitize probe thermometer?
How To Clean And Sanitize The Thermometer Probe
- Wash The Thermometer In Warm Water. Washing your thermometer probe wish warm water will remove any residue that may be on the probe, and it’ll help start the sanitizing process. …
- Sanitize The Thermometer With Alcohol. …
- Rinse The Thermometer. …
- Air Dry The Thermometer.
As with any cooking utensil, food thermometers should be washed with hot soapy water. Most thermometers should not be immersed in water. Wash carefully by hand.
Clean your thermometer before and after you use it with either rubbing alcohol or lukewarm soapy water, then rinse with cool water. Wipe it dry with a clean cloth or let it air dry.
Wipe down the thermometer with rubbing alcohol.
Put rubbing alcohol on a cotton ball or cotton pad. Rub it up and down the whole surface of the thermometer, cleaning the body and the stem. Make sure to thoroughly clean the entire surface.
How do you take your temperature by mouth?
- Put the thermometer under your tongue, a little to one side of the centre. Close your lips tightly around it.
- Leave it there for as long as the instructions say.
- Remove the thermometer and read it.
- Clean the thermometer with cool, soapy water.
A factor that needs to be considered is how you took your temperature. If you measured your temperature under your armpit, then 99°F or higher indicates a fever. Temperature measured rectally or in the ear is a fever at 100.4°F (38°C) or greater. An oral temperature of 100°F (37.8° C) or more is a fever.
Soak a cotton ball or pad in rubbing alcohol ($4, Walmart) and use it to thoroughly coat the entire device. Use a cotton swab dipped in alcohol to clean inside any small crevices. Allow the alcohol to air-dry on the thermometer to effectively kill germs.
You could also sanitize the thermometer by holding the stem in boiling water for no less than 30 seconds. The temperature of boiling water is 212-degrees Fahrenheit, which is more than sufficient at destroying harmful bacteria.
Probe thermometers must be cleaned and sanitized by using alcohol swabs or a sanitizing solution after each use. To sanitize, mix 5 ml (1 tsp) of unscented bleach with 750 ml (3 cups) of water. Sanitizing the probe thermometer will help you avoid cross-contamination.
For glass thermometers, wash it with soap and cool water, then rinse and dry. Or you can it wipe with a cloth soaked in alcohol. Allow it to air dry. For digital thermometers, wipe the probe with alcohol and a soft cloth.