Steps:
- When cutting fiber-cement siding with circular saw, use a blade that has only four or six teeth.
- To keep dust to a minimum, use a circular saw that’s equipped with either a dust-collection bag or electric fan that blows dust into a bucket.
- For a slow, but virtually dustless way to cut siding, use power shears.
Herein, can you cut cement board with a hand saw?
While power saws make it a lot easier, it is possible to cut cement boards by hand.
Keeping this in view, do I need a special blade to cut cement board?
Use a carbide-tipped wood-cutting blade to minimize dust.
Cement is a very hard material, so you’ll need to use a blade that can handle the material. Carbide-tipped wood-cutting blades have fewer teeth than other circular saw blades and the carbide can withstand the strain of the cement.
How do you cut a cement board with a circular saw?
For straight cuts, use a circular saw fitted with a carbide-tipped wood-cutting blade, pushing the saw into the material with slow, even pressure. Here’s a little secret: Use a blade with the fewest number of teeth you can find.
How do you cut cement board without dust?
How do you fasten Hardie board?
Fasten the siding – You can fasten it with a pneumatic nailer or nailing by hand. You can use corrosion-resistant screws, or you can use stainless steel or hot-dipped galvanized nails. You can nail the siding by either blind nailing it at the top or face nailing it at the bottom.
How do you install fiber cement siding?
How to Install Fiber Cement Siding
- Fiber cement is tougher than other materials. Installing fiberboard cement siding. …
- Hold the starter 1/4 in. down. …
- Preassemble the corners. …
- Remove the plastic last. …
- Flash the butt joints. …
- Windows need drip cap and a gap on top. …
- Vinyl mounting blocks work best. …
- Don’t skip the kick-out flashing.
What do you cut fiber cement board with?
For cutting fiber-cement siding, it’s best to use a 4- to 6-tooth polycrystalline diamond-tipped (PCD) blade made specifically for fiber-cement. Regular carbide blades will cut fiber cement, but they dull relatively quickly, and if you attempt a gang cut, the blades overheat and can warp.
What is the best way to cut Hardie board siding?
You can use a jigsaw, table saw or circular saw, or another tool, as long as it’s equipped with the right kind of blade. Once prepared, cut the Hardie board as you would any other material. Mark your line; align the board against the guard as needed and slowly but firmly make the cut.
What kind of blade do you use to cut Hardie board?
what is the best saw blade for James hardie siding? For a larger project, use a fiber cement saw blade with polycrystalline diamond tips; if you’re installing Hardie siding on a shed or other small building you can use a fiber cement saw blade with carbide tips.