What is a magnetic stirrer used for?

A magnetic stirrer is a device widely used in laboratories and consists of a rotating magnet or a stationary electromagnet that creates a rotating magnetic field. This device is used to make a stir bar, immerse in a liquid, quickly spin, or stirring or mixing a solution, for example.

>> Click to read more <<

Consequently, can magnetic stirrers be heated?

79-1 Magnetic Stirrer Specifications:

The knob on the left can be used to control the stirring speed up to 2400 RPM. The knob on the right can be used to control heating up to 380°C/716°F.

Correspondingly, how do you calibrate a magnetic stirrer? 6.3 Calibration of temperature:

  1. Start the calibration procedure by using calibrated thermometer ranging up to 300oC. …
  2. Place the beaker or flask containing sample in the mid most of hot plate stirrer. …
  3. Operate only hot plate without using magnetic stirrer. …
  4. Set temperature of the hot plate by temperature regulator.

In respect to this, how do you fix a magnetic stirrer?

Ways to Solve Magnetic Stirrer Issues

  1. Increase the speed slowly.
  2. Use the correct stir bar.
  3. Try switching vessels.
  4. Use a unit with more power.
  5. Consider using an overhead stirrer.

How do you make a magnetic stirrer?

How to Make a Cheap, Portable Magnetic Stirrer

  1. Step 1: Glue the Magnets to the Fan. Prepare and clean the fan for use. …
  2. Step 2: Add Spacers. …
  3. Step 3: Add the Main Platform. …
  4. Step 4: Make the Stir Bar. …
  5. Step 5: Powering Your Magnetic Stirrer. …
  6. Step 6: Use It. …
  7. 90 Comments.

How do you use a magnetic stirrer in a lab?

To use the magnetic stirrer:

Turn on the magnetic stirrer by flipping the power switch on (–), then rotating the left knob in a clockwise direction. 3. The farther you rotate the knob, the faster it will spin to stir your solution. You can control the stirring speed between about 120 and 1400 rpm.

How do you use a stir plate?

Using Your Stir Plate

Cover the mouth of your flask or container with a tinfoil cap. Plug in the stir plate with the power switch in the off position. Place the starter (with the stir bar) on top of the stir plate. Slide the container around a little to make sure the magnet is holding the stir bar.

How does a chemical stirrer work?

How does it work? A stir bar magnet is placed inside a container, immersed in the fluid. A separate magnet (or magnets) is placed underneath the container, so that it attracts to the stir bar magnet. The lower magnet is usually attached to a motor that spins it.

How long can you run a magnetic stirrer?

At maximum power the hot plate will take around 20-30 minutes to boil a large beaker of water. The plate surface temperature can reach over 250°C when the knob is turned to maximum power. WARNING: Do not use the unit for more than 4 hours on maximum heat.

How many types of stirrers are there?

There are two types of Agitators commonly used, 1. Mechanical Agitators, 2. Electronically Controlled Agitators, I’ll demonstrate commonly used Mechanical Agitators.

What are magnetic stirrers made of?

Many stir bars are made with ceramic or Alnico magnets. Ceramic magnets are inexpensive and common, but not nearly as strong as a neodymium magnet. They have only about 8-10% of the pull force. Alnico magnets are made from aluminum, nickel and cobalt.

What are the two types of stirrer?

A Guide to Different Types of Stirrers

  • Magnetic Stirrers. Magnetic stirrers use a rotating magnetic field to cause a stirrer bar (of flea), immersed within a liquid, to spin and therefore stir. …
  • Stirrer Hotplates. …
  • Aluminium. …
  • Paddle. …
  • Centrifugal. …
  • Turbine. …
  • Dissolver. …
  • Propeller.

What are the uses of magnetic stirrer with hot plate?

The primary use of magnetic stirrer or hot plate with magnetic stirrer is to conduct biological and chemical experiments by mixing two components. It is equally suitable for solids or liquid samples to obtain a consistent liquid mixture. Examples include media for bacterial growth and chemical synthesis.

What does stirrer mean?

a person who deliberately causes trouble

What is a scientific stirrer called?

A magnetic stirrer or magnetic mixer is a laboratory device that employs a rotating magnetic field to cause a stir bar (or flea) immersed in a liquid to spin very quickly, thus stirring it.

What is a spinbar?

Elliptical (Egg-Shaped) Spinbar® Magnetic Stirring Bars

SP Bel-Art. These egg-shaped stirring bars are designed especially for use in round-bottom vessels as they spin unrestricted by the vessel contour.

What is a stirring rod used for in chemistry?

A glass stirring rod is used to stir or mix solutions. One of their main uses is to “scratch” the side of glassware (such as an Erlenmeyer Flask) to start the crystallization process in many experiments.

What is electromagnetic stirrer?

Electromagnetic stirring (EMS) is the process by which a high level of stirring efficiency can be achieved through interaction between the magnetic field from the static induction coil and the electrically conducting metal bath.

What is hot plate and magnetic stirrer?

The hotplate stirrer (or hot plate stirrer or hot plate magnetic stirrer) is used for mixing and heating aqueous solutions for a great variety of chemical reactions such as synthesis. VELP hotplate stirrers are available in various models and combinations in both analog and digital configurations.

What is immersed in the liquid to provide the stirring action?

The main function of a stirrer is to agitate the liquid for speeding up the reactions or improving mixtures. A magnetic stirrer is often used with hot plates. The stir bar is the magnetic bar which is immersed in the liquid to provide the stirring action.

What is the principle of magnetic stirrer?

The electromagnetic stirrer utilizes the principle of a linear motor and differs from the conventional mechanical and decompression types as it is a noncontact stirrer in which no part touches the molten metal.

What is the use of stirrer in a calorimeter?

Stirrer is used in a calorimeter to ensure proper mixing of the contents of the calorimeter. This will help in correct measurement of temperature, and thus the involved heat exchange calculated will have less error.

Which objects can you use to stir a solution?

A glass rod is used to manually stir solutions. It can also be used to transfer a single drop of a solution. Forceps (or tweezers) are used to pick up small objects. A funnel is used to aid in the transfer of liquid from one vessel to another.

Who invented magnetic stirrer?

Richard Stringham

Why a stirrer is used in the calorimeter?

Stirrer is used in a calorimeter to ensure proper mixing of the contents of the calorimeter. This will help in correct measurement of temperature, and thus the involved heat exchange calculated will have less error.

Will a magnetic stirrer work with stainless steel?

Do not use cleaning agents capable of attacking the surface of the magnetic stirrer (3): MOBIL 200 and MOBIL 600: stainless steel surfaces, MOBIL with center hole: aluminium surface, anodised. The equipment is maintenance-free.

Leave a Comment