It is important to use the correct size file. Generally, 1/4 and 3/8 “low profile chains require a 5/32″ file. 0.325 “chains require a 3/16” row and standard 3/8 “and 0.404” chains require a 7/32 “row.
One may also ask, how can I tell what gauge my chainsaw chain is?
In respect to this, how do you sharpen a chainsaw with a filing guide?
How do you sharpen a chainsaw with a Stihl file?
How many times can a chainsaw chain be sharpened?
To keep your saw cutting in a straight line, be a fanatic about filing each cutter with the same number of strokes and the same amount of pressure. Cutters can be sharpened up to 10 times or more before the chain needs replacing.
How much does it cost to sharpen chainsaw chain?
A 16″ chain costs anywhere from $13-20. Pay $4-7 per chain to sharpen, and that’s up to 50% of the cost of a new chain!
How often should you replace chainsaw bar?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
Is it worth sharpening a chainsaw chain?
The correct file to sharpen any given chain is worth less than five bucks. It will touch up a chain and keep it sharper than new literally a hundred times (assuming there is no physical damage to the chain). You can sharpen a chain until the little slash mark at the back of the tooth. It is, however, a learned skill.
What does 3/8 mean on a chainsaw chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
What size chain is on a Stihl ms180c?
Oils & Lubricants
| MS 180 C-BE Specifications – Occasional Use | |
|---|---|
| POWER SOURCE | Gas |
| GUIDE BAR LENGTH (Recommended) | 16 in. |
| OILOMATIC® CHAIN | 3/8″ PMM3 |
| CHAIN OIL CAPACITY | 4.9 oz. |
What size chainsaws does Stihl make?
Stihl chainsaws come in sizes that range from 10 to as much as 59 inches. Chainsaw bar lengths are typically expressed in 2-inch increments, most often as an even number.
What size file do I need for a 325 chain?
File sizes
| Chain pitch | Round file diameter |
|---|---|
| 1/4″ | 4.0mm |
| .325 | 4.8mm |
| 3/8″ | 5.2mm |
| .404 | 5.5mm |
What size file do I use to sharpen my chainsaw?
A Round File
The round file will be useful in sharpening the cutting edges of the chain cutters. This round file needs to perfectly match the diameter of the cutters. The most commonly used by most homeowners are 7/32”, 3/16” and 5/32”.