Walnut turns best at a lathe speed of 800-1,000 rpm, and requires sharp tools. Bowl turners know that walnut’s pronounced end grain in the bottom of a bowl tears easily and produces a surface that can be difficult to sand. The best finish for walnut is a clear one. Several coats of Danish oil provide clarity.
Subsequently, can all lathes turn bowls?
What kind of lathe do I need to turn wooden bowls? A wood bowl lathe is really no different than any other lathe. Most lathes will work. However, some characteristics make certain lathes better at turning bowls than others.
Then, can you make money turning wood bowls?
While a part-time turner might not be turning enough to quit the day job, they can also make decent money selling wood bowls.
How do wood lathes make money?
This process can take three to six months. Once dried, the wood bowl goes back on the lathe for its final turning. The timing for this again depends on the size and style of the bowl, anywhere from 30 minutes to an hour.
Wood will become “dry” by letting it sit for a long enough period of time. A rule of thumb that is thrown around often is one year of air drying time per one inch of wood thickness. A dryer or kiln can be used to reduce the moisture content more rapidly.
Live oak is a favorite of mine cause it turns so nicely. most all oaks I prefer using for one time turnings. I also use green live oak a lot in demos for turning balls. No dust and scrapes well.
Pine is an excellent wood for beginning turners. It is a soft wood and is easy to shape on the lathe. Cutting with a gouge or skew chisel produces a better finish than a scraper when turning between centres. When you are turning bowls you will need a properly burnished scraper to produce a good surface.
Selling your woodturning projects can be a profitable venture with a little research and work at the lathe. A few final tips for standing out amongst the Etsy crowd. Invest some time and money to take good photographs.
For a bowl-turning lathe, we recommend a lathe with AT LEAST 16 inches of swing. Typically, most floor-standing lathes start at 16 inches of swing with the higher-end models going up to 24 inches. Some specialty bowl turning lathes feature even more swing!
The 5 Best Wood Lathes in 2022 (Unbiased Review)
- JET JWL-1221VS Wood Lathe.
- WEN 3424T Wood Lathe.
- RIKON 70-100 Wood Lathe.
- Delta Industrial 46-460 Wood Lathe.
- Powermatic 1352001 Wood Lathe.