Unlike regular “drop-in” sinks, which are lowered into a countertop cavity, farmhouse sinks are installed beneath the counter and rest on top of a base cabinet. They therefore require a special cabinet configuration, but it’s entirely possible to convert an existing drop-in setup to accommodate a farmhouse sink.
Consequently, are farmhouse sinks out of style 2021?
Single bowls will remain hot, but apron-front, or farmhouse, sinks will not be too far behind. The same goes for kitchen faucets: 42% of designers expect stainless to remain most popular, but black faucets come in second with 32% of designers believing the color will be most popular.
Regarding this, can you put an apron front sink in a regular cabinet?
Yes, you definitely can! Something you should keep in mind, though, is you’ll have to cut out the front of the cabinet and remove the counter top prior to farm sink installation. If you want to make the job easier, consider getting a retrofit farmhouse sink, which is meant for a standard kitchen sink base.
Do you need special cabinet for apron sink?
Apron front sinks require a special cabinet to accommodate their depth and protrusion, so they are not the best candidate for retrofitting in an existing kitchen, unless you’re willing to replace your sink cabinet as well.
How do you modify an existing cabinet for a farmhouse sink?
How to Modify an Existing Cabinet for a Farmhouse Sink
- Release the False Front. Remove screws from the inside of the cabinet using the power drill. …
- Remove the Face Frame. …
- Take Your Measurements. …
- Cut the Studs. …
- Cut a Piece of Plywood. …
- Center the Sink on the Plywood. …
- Set the Plywood in the Cabinet. …
- Caulk Around the Edges.
How do you support a farmhouse sink in a cabinet?
How much does it cost to put in a farmhouse sink?
The average cost of installing a farmhouse sink is around $170, but it can be significantly lower or higher, depending on the complexity of the installation and other factors. On the low end, expect to pay $75 to $90 for installation. If the installation is particularly complex, you might pay $380 to $480.
What is the difference between a farmhouse sink and an apron sink?
Apron sinks are deep cut, like farmhouse sinks. The only difference is, an apron sink’s front is exposed. That’s why they’re also called “apron front” sinks. Modern kitchens use apron sinks as highlight pieces, and for good reason.
What kind of base cabinet do you need for a farmhouse sink?
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
What size cabinet do you need for a 36 inch apron sink?
What size farmhouse sink should I get for a 36″ cabinet? The recommended size for a 36″ base cabinet is a 33″ farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
What size cabinet do you need for a farmhouse sink?
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3″ longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36″ wide it will support a 33″ sink.