How do I change the label length on my Brother P-touch?

by

FAQs & Troubleshooting

  1. Press the [Label] key ( / ).
  2. Press the [Cursor] key ( ) until [Label Length] is displayed.
  3. Press the [OK] key ( ).
  4. Press the [Cursor] key ( ) until your desired length is displayed. ( AUTO or 30 – 300 mm / 1.2″ – 12.0″) …
  5. Press the [OK] key ( ) to apply the setting.

>> Click to read more <<

Hereof, how do I change the settings on my Brother P-touch?

Using P-touch Template Settings

  1. Open the Printer Setting Tool. Refer to “Using the Printer Setting Tool (for Windows)”.
  2. Select P-touch Template Settings. The P-touch Template Settings window appears.
  3. Specify or change the settings. See below for detailed information.
Besides, how do I keep my brother P-touch from wasting tape? How to Keep a Brother P-Touch From Wasting Tape

  1. Press the Power key located on the upper left side of the device. …
  2. Press the “Function” key, located in the center of the P-Touch.
  3. Press the right arrow key until “Length” appears on the display, then press the Return key.

Additionally, how do I shorten the P-touch label maker?

How do I eliminate the margin from the start or end of my label when printing?

  1. Press the [Label] key ( / ).
  2. Press the arrow key or. to select “Margin”.
  3. Press the arrow key or. to select “Narrow”.
  4. Press the [OK] key ( ) or [Enter] key ( / ). This eliminates the margin at the end of the tape after printing as shown below:

How do you shorten tabs on a Brother label maker?

To change the tab length:

  1. Press Label.
  2. Press ◄ or ► to select Tab Length.
  3. Press OK and the current tab length is displayed.
  4. Press ◄ or ► to set the tab length. The number keys may be used to set the numeric tab length. The length can be set from 0” – 4”. …
  5. Press OK to set the tab length.

4 Related Question Answers Found

What does text limit mean on Brother P-touch label maker?

The text length exceeds the selected label length or the selected Auto Format setting length.

What is label length on label maker?

Note: The Length of a label can be set from 1.2 inch up to 12 inches; the default is Auto. Note: To return to Auto press the Space bar key (below the X key). In Auto the machine will automatically change the length to fit the text.

What is tab length on Brother label maker?

The tab length setting allows you to set tabs that are the same length and are measured from either the beginning of the line or the previous tab. The tab length can be set between 0.0 – 4.0 in (0.0 – 100 mm).

Why does one inch piece of lead tape feed or cut off prior to every label that prints out how can this tape waste be eliminated?

Ordinarily a small piece of tape, 1 inch long, will first precede the printed label to ensure that this happens. This extra feed material cannot be eliminated. However, there are tape cutting options that can reduce the amount of wasted tape.

Leave a Comment