Thereof, how can I tell what pitch my chainsaw is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
People also ask, how do you sharpen a chainsaw with a filing guide?
How do you use a 2 in 1 chainsaw sharpener?
How many times can you sharpen a chainsaw chain?
To keep your saw cutting in a straight line, be a fanatic about filing each cutter with the same number of strokes and the same amount of pressure. Cutters can be sharpened up to 10 times or more before the chain needs replacing.
How often should I sharpen my Stihl chainsaw?
A general rule of thumb is to sharpen your chain when you notice it is not cutting as well as before. Another way is to look at the sawdust if you see small chunks it is an indication that the chains are getting dull. Large chunks indicate a sharp chain.
What chain does a Stihl ms170 use?
The STIHL MS 170 is the perfect lightweight chainsaw for homeowners seeking a great value.
| MS 170 Specifications – Occasional Use | |
|---|---|
| POWER SOURCE | Gas |
| GUIDE BAR LENGTH (Recommended) | 16 in. |
| OILOMATIC® CHAIN | 3/8″ PMM3 |
| CHAIN OIL CAPACITY | 4.9 oz. |
What is the angle for sharpening a Stihl chainsaw?
What size file do I need for a .325 chain?
File sizes
| Chain pitch | Round file diameter |
|---|---|
| 1/4″ | 4.0mm |
| .325 | 4.8mm |
| 3/8″ | 5.2mm |
| .404 | 5.5mm |
What size file do I use to sharpen my chainsaw?
A Round File
The round file will be useful in sharpening the cutting edges of the chain cutters. This round file needs to perfectly match the diameter of the cutters. The most commonly used by most homeowners are 7/32”, 3/16” and 5/32”.
What size file do you use on a 3/8 chain?
It is important to use the correct size file. Generally, 1/4 and 3/8 “low profile chains require a 5/32″ file. 0.325 “chains require a 3/16” row and standard 3/8 “and 0.404” chains require a 7/32 “row.
Why does my chainsaw chain dull so quickly?
If your chain dulls quickly, then it could be a couple of things. Check your user’s manual to ensure that you are using the right sized file for your chain. Alternatively, you could be applying too much pressure when you file. This will create cutting edges that are too thin and dull quickly.
Why does my chainsaw cut at an angle?
Check the size of the top plates, which sit on the longer sections of each tooth on the chain. These top plates should be the same size. If some are shorter than others, file the longer ones down to match. Keep the same angle on all the top plates as you file – angles that don’t match also can cause curved cutting.
Will a 3/8 chain fit a .325 bar?
No you can’t use a 3/8 chain on a . 325 bar unless the sprocket is . 325,if it is than as long as the guage is correct it will work. If it is a laminated bar it is doubtful the sprocket has been changed.