If you have a gas water heater, adjusting the temperature is easy. Simply turn the dial located on the front of the gas control valve. The hot setting will be around 150 degrees while warm will be around 95 degrees. As mentioned earlier 120 degrees is the recommended setting.
Then, does turning up water heater make hot water last longer?
Turn up the thermostat on the hot water heater. One of the easiest ways to make a hot shower last longer is by using less hot water while it’s at a higher temperature. To do this, turn up the temperature on the thermostat that’s attached to the hot water heater tank.
Also know, how do you adjust a hot water temperature control valve?
To adjust the temperature supply remove the plastic cap on top of the valve and adjust with a close fitting spanner. To increase the temperature turn anti-clockwise To decrease the temperature turn clockwise To set the valve to a maximum recommended mixed water temperature, see table below.
Should water heater thermostats be set to the same temperature?
The majority of electric water heaters have two thermostats: an upper and a lower, located under two control panels. To ensure your electric water heater works as efficiently as possible, you should set both of the thermostats at the same temperature.
What temperature should hot water heater be set at?
120 degrees Fahrenheit is the safety recommendation against scalding, but 140° is the common default setting. Most experts agree that anything below 120 degrees creates a risk for bacteria to develop inside your water heater from stagnant water, such as legionella that causes Legionnaire’s disease.