TAKING AN ORAL TEMPERATURE
Using the diagram on the right, place the thermometer tip under the tongue as near as possible to the heat pocket. The diagram also shows the temperature variables by not placing the tip in the heat pocket area. The temperature reading should take approximately sixty seconds.
Subsequently, how do I activate my digital thermometer?
To use a digital thermometer:
- Clean the tip with cold water and soap, then rinse it.
- Turn the thermometer on.
- Put the tip under your tongue, towards the back of your mouth.
- Close your lips around the thermometer.
- Wait until it beeps or flashes.
- Check the temperature on the display.
In respect to this, how do I change the battery in my digital thermometer?
How do I know if my digital thermometer is working?
Hold the thermometer inside the glass for 30 seconds.
Keep still and hold the thermometer in place without touching the glass. In most cases, 30 seconds is plenty of time to get an accurate reading. Electronic thermometers usually beep when they’re done, so you don’t have to count.
How do I reset my digital thermometer?
How do you check if a thermometer is working?
To test your thermometer:
- Fill a tall glass with ice and add cold water.
- Place and hold the thermometer in the ice water for 30 seconds without touching the sides or bottom of the glass. …
- If the thermometer reads 32°F, it is reading correctly and can be used.
How do you use a Kroger ear thermometer?
What does Lo mean on a digital thermometer?
The “Lo” or “Hi” indications on the display mean that the temperature cannot be measured because the temperature is outside the temperature range. Press the on/off button to switch off the digital thermometer.