How do you hide an exposed water heater?

by

Ideas for Hiding a Hot Water Heater

  1. Add a Closet. If you have the space, you can hire a contractor to install drywall and a door. …
  2. Create a Hot Water Cover or Cabinet. Creating a cabinet is a great option if you want something less permanent than a closet. …
  3. Hang Curtains. …
  4. Use a Room Divider or Screen.

>> Click to read more <<

Correspondingly, can I put a curtain around my water heater?

Curtains. Perhaps the simplest way to hide your furnace and water heater is to add a sliding curtain as a divider. You will need to measure the wall height to determine proper curtain length, as well as the needed width. Be sure to give a few inches of clearance so the curtain doesn’t touch your heater.

Moreover, can you box in a hot water heater? The short answer to whether a water heater can be enclosed is “Yes,” but there are some important things to consider when placing a hot water heater in an enclosed area, whether the unit is gas or electric. Any hot water heater must be installed in such a way as to prevent spills and allow easy access to controls.

In this regard, do hot water heaters need ventilation?

Water Heater Venting Basics

In addition to venting, gas and propane water heaters need an air supply for combustion. This may come from the atmospheric air in the house, or it can come through a vent pipe that pulls air from the outdoors.

How do I hide my hot water heater in my garage?

You can use divider screens or tall standing shutters screens to hide a water heater. Because screens are freestanding, moving them is easy. Creating a screen to cover your water heater creates a wall that can be equipped with many opportunities for storage.

3 Related Question Answers Found

How do you enclose a hot water heater?

If you have a gas water heater, cut holes into the drywall for the air vents. Place one vent hole 12 inches from the floor in one wall, and the other vent hole 12 inches from the ceiling of the adjoining wall. Apply a coat of primer to the drywall and allow it to dry, then coat the drywall with two coats of paint.

How much clearance do you need around a water heater?

Water heaters must be surrounded by a certain amount of clearance, or air space, to function properly and safely. A clearance area of 12 inches is required on all sides of a hot water heater. A certain amount of airflow is also required for proper combustion and ventilation.

Is it safe to put a curtain around water heater?

Don’t install your curtain so it directly touches the water heater since it could create a fire hazard.

Leave a Comment