How do you monitor the temperature of a wood stove?

>> Click to read more <<

Similarly one may ask, can I burn pallet wood in my log burner?

Heat treated pallets would be ok to use as kindling, but you don’t want to be burning the ones treated with chemicals as they can release toxic fumes. Pallets that have been treated will have a stamp indicating this.

In this way, how hot can wood stove pipe get? Stove top temps range from 500-650. Non cats generally burn a little hotter pipe temps from my experience.

Similarly, how hot does a wood burner flue get?

150 to 250 degrees centigrade

How hot is too hot for my wood stove?

How hot is too hot when it comes to wood fire stoves and fireplaces? Anything over 800°F is starting to get too hot and could damage your wood stove or fireplace.

What is the optimal temperature for a wood burning stove?

Keep It Hot

One of the keys to high-efficiency combustion is keeping the combustion zone hot, at least 600°C (1,100°F). If it is colder than that, the wood will tend to “smolder” (hot enough for combustible gases to escape from the wood, but not hot enough for those gases to burn).

What should my flue temp be?

A good rule of thumb is to get the temperature up to a stovepipe thermometer reading of 450 degrees F. for the first half-hour, and to keep it at an average of 300 degrees thereafter, each day that you start your stove.

Where do I put the imperial burn indicator?

The magnetic Burn Indicator for Sedore multi-fuel biomass stoves attaches to the stove pipe approximately 18″ up from the stove top. This indicator will help you to manage the burn rate and heat output from your Sedore stove.

Where do you put a flue thermometer?

DESCRIPTION

  1. Place the Thermometer on the top, front, or side of a flat or curved surface. …
  2. The optimum position is on the flue collar, or if not practical, as close to the collar as possible for a stable reliable place for monitoring the stove and flue gas temperature.

Why do I need a stove thermometer?

Your stove is rated to a specific KW output and attempting to raise this with more fuel will at best just be lost up the chimney, at worst, it will over-fire, decrease the lifespan of the burner and affect the terms of the manufacturer’s warranty. A thermometer allows you to avoid this costly user error.

Why does my wood stove have two dampers?

Modern Stoves

Open both front dampers completely before starting a fire. Modern, efficient wood stoves have dampers below the firebox, or combustion chamber, to supply air directly to the fuel source as well as an additional damper on the door to supply air to allow combustion of gasses released by the burning wood.

Leave a Comment