Insert a new tape cassette into the cassette tape compartment on the bottom of the P Touch Label Maker. Pull down the lever to secure the tape cassette in place. Close the tape cassette compartment. Simultaneously press the “Code” button and the “Feed” button to advance the label tape.
Keeping this in view, how do I center my brother label maker?
To change the alignment:
- Press Font.
- Press ◄ or ► to select Alignment.
- Press OK and the current alignment is displayed.
- Press ◄ or ► to select the setting you want: left, center, right, or justify.
- Press OK to set the alignment.
Furthermore, how do I change the font color on my Brother label maker?
How do I change the font on my p-touch?
How to Change the Font in a P-Touch
- Press and hold down the “Code” button. This button is located to the far left of the bottom row.
- Click the “1” button to switch to the next available font. …
- Release the “Code” and “1” button when the desired font is displayed.
How do I change the settings on my Brother label maker?
Press the [Font] key. Press the [Cursor] key to select an item you want to change (Font/Size/Width/Style), and then press the [OK] key. Press the [Cursor] key to select the settings, and then press the [OK] key.
How do I change the size of my p-touch?
While holding down the “Code” key, press the “Size (2)” key. Keep the “Code” key held and press the “Size (2)” key until the desired size setting is displayed. If you select “Auto”, the P-touch machine will automatically select the largest possible size for the tape installed.
How do I make my font bold on my Brother label maker?
How to change a font to bold
- Select a True Type font.
- Click TTF Settings. – The TrueType Font Attribute Setting screen appears.
- Click the Font style desired and click OK.
How do I reset my P Touch label maker?
FAQs & Troubleshooting
- Turn off the P-touch.
- Hold down the “Shift” and the “R” keys.
- While holding down the “Shift” and the “R” keys, press the “On/Off” key or Power key once and then release the “Shift” and the “R” keys.
- “English” should be on the display. The machine has been initialised.
How do I setup my P Touch label maker?
Setting up the P-touch labeler
- Setting the tape cassette. Open the cassette cover. Insert the tape cassette. Close the cassette cover. …
- Connecting the power supply. Power the P-touch labeler using the AC adapter or batteries. Using the AC adapter. Plug in the P-touch labeler using the AC adapter.
How do you use symbols on Brother label maker?
How do I type symbols?
- Press the [Symbol] key ( / ) to enter the Symbol selection screen.
- Press or to select the desired category.
- Press the [OK] key ( ) or [Enter] key ( / ).
- Press , , or until the desired symbol appears.
- Press the [OK] key ( ) or [Enter] key ( / ) to add the symbol to the text.
Why is my Brother P Touch label maker not printing?
The label is not printed after pressing the Print key. Check that the text has been entered and that the tape cassette has been properly installed with sufficient tape remaining. If the tape is bent, cut off the bent section and thread the tape through the tape exit slot.
Why is my label not printing?
The first thing you should do when your label printer is acting up is: check all the hardware! Open the printer. Make sure there is paper, with the label side facing up. Reset the paper, close the printer and hit the feed button, just to double-check!
Why is my P-Touch label maker not working?
Dead/Weak Battery
If your label maker won’t turn on, you should make sure the batteries are not dead or about to run out. Replace the old batteries with six new AAA batteries. Make sure you replace them properly using this Battery Replacement Guide. Check the upper battery terminals.
Why will my label maker not print?
If the label machine is printing a blank label, this may indicate a problem with the tape cassette or the label machine’s power supply. … If the problem persists, your machine may require service.