If you need them, we will also provide and fit free smoke alarms in any room where a fire might start. This can be done on the day.
Keeping this in consideration, do you really need to replace smoke detectors every 10 years?
The National Fire Protection Association (NFPA) recommends every smoke alarm be replaced after 10 years and that regular batteries be replaced every six months. With 10-year sealed battery alarms, battery replacements and late-night battery chirps are eliminated for a decade.
Similarly, how do I know if my smoke alarms are interconnected?
Most alarms have a test push button as standard. Press this test button for approximately 5 seconds and the alarm should sound. If the detectors at the property are interlinked, they too will also sound.
Is it a legal requirement to have a smoke alarm?
From 1 October 2015, every private rented property needs to be fitted with smoke alarms and carbon monoxide alarms (if applicable). The requirement is to install at least one smoke alarm on every storey of the rental property on which there is a room used wholly or partly as living accommodation.
Is it landlord’s responsibility to test smoke alarms?
Yes, landlords are responsible to test the smoke and fire alarms. They must be tested before a tenant moves in. Carbon monoxide alarm also must be tested. The landlord must check these at the start of every new tenancy to ensure that they work.
What is an interlinked smoke alarm?
Radio-interlinked smoke detectors and heat alarms are interlinked through radio-frequency signals. If one smoke alarm detects fire, all alarms go off. In the case of the battery operated radio-interlinked smoke alarms, no wiring is required at all.
Who is responsible for smoke detector installation?
While you are likely responsible for the initial installation of a smoke detector (or replacement of a broken one), the tenant is responsible for testing the alarm and changing batteries.