What do you cut Hardie plank with?

You can use a jigsaw, table saw or circular saw, or another tool, as long as it’s equipped with the right kind of blade. Once prepared, cut the Hardie board as you would any other material. Mark your line; align the board against the guard as needed and slowly but firmly make the cut.

>> Click to

Likewise, can you cut Hardie board with a wood blade?

There are a few different power tools that you can use to cut cement backer board. Again, these will produce lots of dust, so protect yourself with goggles and a respirator. For straight cuts, use a circular saw fitted with a carbide-tipped wood-cutting blade, pushing the saw into the material with slow, even pressure.

Herein, can you use metal shears to cut cement board? Shears. The best way to cut panels is with electric shears. Those made by Kett Tools, Pacific International, and Porter-Cable cut fiber cement the same way double-action metal shears cut sheet metal: A narrow strip of waste curls up between the knives as the shears make their way across a panel.

Just so, do I need a special blade to cut cement board?

Cement is a tough material to use a jigsaw to cut through, so you need to use the right blade for the job. Use a metal-cutting blade or a carbide-grit blade to cut through the board. Make sure the blade is securely fixed into the saw.

Do you need a special blade to cut Hardie board?

You shouldn’t use a wood blade to cut Hardie or other fiber cement siding. The higher teeth-per-inch count creates more fine dust particles. This increases the installer’s exposure to respirable silica dust, which can lead to future health problems.

How do you cut cement board?

How do you cut cement fiber board?

Lay your cement board flat, and draw a line with a carpenter’s pencil where you intend to cut. Place a straightedge along the line and drag either a drywall utility knife or a scoring tool against it. Repeat your cuts two to three times to make them deeper, which will make snapping the board easier.

How do you cut Hardie board sheets?

A carbide-tipped scoring knife is recommended, but you can also use a utility knife or shears. Never use a high-speed grinder to cut cement board indoors, since this can create a dust hazard.

How do you cut Hardie board?

How do you use fiber cement shears?

What are cement shears used for?

Malco’s one-hand operation fiber cement shears quickly insert into the chuck of a corded or cordless electric drill or impact driver. Smooth, easy one-hand operation always leaves a free hand to steady the work when making cuts on a bench or scaffolding.

What are cement shears?

The Makita Fiber Cement Shear has a powerful motor with variable speed and precision machined blades to cut straight and contour lines quickly and quietly with less dust. The JS8000 is engineered for cutting fiber cement products and select exterior siding products.

What is the best way to cut Hardie plank siding?

What tools are needed to install fiber cement siding?

Essential Tools to Efficiently Install Exterior Solutions by…

  • Shears. The very nature of siding installation requires a fair amount of cutting. …
  • Circular or Power Miter Saws. …
  • HardieBlade for Saws. …
  • Jig Saw. …
  • Masonry Bits and Carbide-Tipped Hole Saw. …
  • Lap Gauge. …
  • Power Nailers. …
  • Useful Hand Tools.

Leave a Comment