Hold the calibration nut securely with a wrench or other tool and rotate the head of the thermometer until it reads 32˚F (0˚C). Thermometers should be calibrated regularly to make sure the readings are correct. The ice-point method is the most widely used method to calibrate a thermometer.
Likewise, do forehead thermometers need to be calibrated?
Infrared thermometers cannot typically be calibrated at home, but they are known for their low drift. If the results of your ice bath test are within your unit’s manufacturer’s listed specification, you are good to go.
Just so, how do you fix an infrared thermometer error?
How to reset infrared thermometer?
- Fill a glass with crushed ice.
- Add a little clean water until the glass is full and stir.
- Wait for about three minutes before inserting the sensor on the thermometer into the ice-filled water.
- Wait for about thirty seconds and check that the thermometer reads 32°F.
How do you reset an infrared thermometer to Fahrenheit?
How to change infrared thermometer from celsius to fahrenheit
- Step 1: Make sure the thermometer is off.
- Step 2: Press and hold the power button, and after about 5-7 seconds, the display screen will come back in turn: “℃/SET, ℉/SET”.
Why does my infrared thermometer read hi?
If you are getting the “HI” error message on your thermometer, it means that the target object temperature is higher than the thermometer’s measurement range (43°C for body temperature mode or 93.2°C in object temperature mode).