Why does Braun Thermoscan POS?

The code is POS which means “If the probe has not been constantly placed in a stable position in the ear canal, a sequence of short beeps will sound, the exac temp light will go out and the display will show a error message POS=position error.” This is in the manual that comes with the thermoscan.

>> Click to read more <<

Hereof, are Braun ear thermometers accurate?

Braun ThermoScan® 5 Ear thermometer

The Braun ThermoScan® 5 is proven more accurate than forehead or rectal measurement, with a super fast reading – even for the fussiest child.

Then, how do I fix the POS error on my Braun ThermoScan? System Error – Wait 1 minute until the thermometer turns off automatically, then turn on again. If error persists reset the thermometer by removing the batteries and putting them back in. If error still persists contact your Welch Allyn representative. Insert new batteries.

One may also ask, how do I know if my digital thermometer is accurate?

The ice bath test is the easiest way to test a thermometer for accuracy, assuming your thermometer will display temperatures of 32°F or less. The advantage of this method is that an accurate thermometer will always read 32°F in a properly made ice bath regardless of altitude or atmospheric pressure.

How do I unlock my Braun thermometer?

Upon expiration of the time limit, the unlocked icon and countdown timer will be replaced with the locked icon and the thermometer will beep once every 5 minutes to indicate locked state. Unlock the thermometer by returning it to the charging station.

How do you fix a POS error on a thermometer?

The POS error means that the thermometer probe was not positioned correctly in the ear and an accurate reading was not possible. If this does not work, it is recommended to replace and move the lens filter again and then press Start to start a new measurement.

How do you open a Braun Thermoscan?

How do you reset a Braun Thermoscan?

Reset your Smart Ear Thermometer:

  1. Slide the battery cover down then pull it away to expose the battery compartment.
  2. Remove the batteries.
  3. Wait 10 seconds.
  4. Put the batteries back in, the same as they were before.
  5. Push the button to turn on the thermometer.

What is normal ear temperature?

The normal ear temperature for adults is 99.5° F (37.5° C).

Why is my Braun Thermoscan not working?

If the issue continues, make sure the probe tip and lens are clean and a new, clean, disposable lens filter is attached. Make sure the thermometer is properly inserted. Then, take a new temperature. If you are still having trouble, please contact our Consumer Relations Team at [email protected].

Leave a Comment