How do I change my ear thermometer from Celsius to Fahrenheit?

In this manner, how do I change my Braun ear thermometer from Celsius to Fahrenheit?

Press and hold down the «start» button. After about 8 seconds the display will show this sequence: «°C» / «°F» /… Release the «start» button when «°F» is shown. There will be a short beep to confirm the new setting, the thermometer then turns off automatically.

Keeping this in consideration, how do I change my equate thermometer to Fahrenheit? With the thermometer OFF, hold down the “mode” button until the hourglass and F or C shows up. Continue mashing Mode then press the Power button and it will toggle F or C everytime you press power (while still holding Mode). Let off both buttons when it’s on the setting you want.

Regarding this, how do I change the mode on my equate thermometer?

Temperature readings are available in the Fahrenheit or Celsius scale (°C / °F; located in the right of LCD.) With the unit off, press and hold the On/Off Button for approximately 4 seconds to change the current setting.

How do I use equate ear thermometer?

How do you calibrate an equate ear thermometer?

Top up the broken ice with a bottle. Give a little clean water and mix until the glass is finished. Wait about three minutes before slipping the sensor into the ice-filled water onto the thermometer. Wait 30 seconds or so and test that the thermometer reads 32-degrees Fahrenheit.

How do you reset an ear thermometer?

Reset your Smart Ear Thermometer:

Slide the battery cover down then pull it away to expose the battery compartment.
Remove the batteries.
Wait 10 seconds.
Put the batteries back in, the same as they were before.
Push the button to turn on the thermometer.