What is the phone number for Moen faucets?

by

1-800-BUY-MOEN

>> Click to read more <<

In this way, how do I contact Moen free replacement parts?

Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022.

Consequently, how do I file a claim with Moen? Moen’s toll-free customer service phone number for the United States is 1-800-289-6636. They are available from 9 a.m. to 5:30 p.m. on weekdays and closed on national holidays. If you’re in Canada, you can call 905-829-3400 for Toronto and 1-800-465-6130 for the rest of Canada.

In respect to this, how do I find the model number of my sink?

The model number is located on the underside of the sink, either molded into the sink material or stamped with ink. Typically the model number starts with a K, such as K-5942. In some cases, the model number is preceded by 97 or 87. For example, 975942 contains the model number 5942.

How do I know what Moen valve I have?

If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.

5 Related Question Answers Found

How do I stop my Moen kitchen faucet from dripping?

How to Fix a Moen Kitchen Faucet That Drips

  1. Prepare Your Tools.
  2. Turn Off Water Source. …
  3. Open Up the Faucet. …
  4. Reveal the O-Ring and Cartridge Tube. …
  5. Determine Location of the O-Rings. …
  6. Remove the Escutcheon or Crown. …
  7. Pull Out the Water Spout. …
  8. Take the O-Rings and Bearings Off.

How do you replace the O ring on a Moen kitchen faucet?

How to Replace an O-Ring in a Moen Faucet

  1. Shut off the water to the faucet beneath the sink. …
  2. Examine the handle of the faucet where the O-ring is located. …
  3. Use the appropriately-sized hex wrench to remove the hex screw holding the faucet handle in place. …
  4. Pull the old O-ring off of the valve body, and discard it.

What size Allen wrench fits a Moen faucet?

For the most part, Moen uses hardware that will require a 7/64 inch hex wrench. This applies to Moen Renzo faucets, handle set screws on one-handle kitchen faucets, and PosiTemp levers in Moen showers.

Where does the O-ring go on a faucet?

Where is model number on Moen kitchen faucet?

The model/series number is usually a four or five digit number and can be followed by letters. On the underside of the spout, the series number may be found. There is a decorative ring at the bottom of the spout that has a series number on it.

Leave a Comment