Our maple butcher block is made with Hard Rock Maple. Solid wood strips go the full length of our butcher block countertops, giving them a better look and more durability than blended butcher blocks where short strips are joined together.
Correspondingly, are butcher blocks worth it?
The only countertop that can actually be used as a cutting surface, butcher-block won’t dull your knives like stone or concrete counters. The soft surface also makes for a quieter kitchen. And for those who are a bit clumsier, dishes are less likely to shatter when dropped on wood versus stone.
In respect to this, can you use an unfinished butcher block?
Any finish is safe to use on a butcher-block table or countertop that will not be used as a cutting surface. If the surface won’t be cut on, the answer is simple: Any film-forming finish you would normally choose for durability and appearance will be just fine (Photo 1).
How do you finish a maple countertop?
How do you finish an unfinished butcher block?
If you plan to prep food on your butcher block countertops, look for a food-safe sealer. Using a foam brush, apply sealer over wood surfaces and let dry. Repeat for a final coat. If you used mineral oil to stain your butcher block, then you won’t need to seal the wood.
How do you seal an unfinished butcher block?
How do you treat an unfinished butcher block?
To seal butcher block with mineral oil, you simply apply the mineral oil generously, let it soak in, and wipe off the excess. You need to do it fairly regularly at first but then only about once a month after you’ve gotten through several applications.
How much does a slab of butcher block cost?
You can expect to pay anywhere from $40 to $100 per square foot or $3,500 on average for materials and installation of your wood butcher block countertop. Materials alone usually run around $20 to $70 per square foot. Butcher block countertops can cost between $2,000 and $5,000 for a 50-square- foot kitchen.
How thick should butcher block countertops be?
Thickness and Edges.
Wood countertop thickness generally ranges from a three-quarter inch to six inches, and butcher block from two inches to 12 inches. A wide variety of edge options exist.
Is birch or maple better for butcher block?
Thanks to the wood’s hardness, maple cabinets and furniture resist scratching better than birch. However, because of its tight grain pattern and glossy surface, even small dents or scratches on maple are visible. Birch, with its more complicated grain patterns, hides scratches better than maple.
Is butcher block cheaper than granite?
Lastly, butcher block is an affordable material, generally costing less than granite. If you have a smaller budget, then butcher block is a beautiful option that doesn’t put strain on your bank account.
Is Hevea wood good for butcher block?
thick CenterPointe butcher block countertop comes unfinished, giving you the flexibility to match any design aesthetic—from traditional to contemporary— with your finish preference. Hevea wood is a highly durable, A-grade, face-grain cut designed to exceed your performance expectations.