How do I reset my AcuRite wireless thermometer?

Hard Reset:

  1. Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
  2. Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button on the display for 20 seconds if applicable.

>> Click to read more <<

Moreover, how do I connect my AcuRite to WiFi?

To connect your display to your Wi-Fi:

From a computer, (you can use a smartphone or tablet but this works best from a computer), open the network tab and click on the AcuRite WiFi Display Model Number. Press the connect button for the Display Model Number. Click the box to connect automatically.

Consequently, how do I pair my AcuRite thermometer? Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize.

Correspondingly, how do you calibrate an AcuRite outdoor thermometer?

Calibrate Temperature & Humidity

To access calibration mode, press AND HOLD the “▲”, “Set”, and “▼” buttons (located on the back of the display unit) for at least 5 seconds. 2. Once in calibration mode, the preference you are currently setting will blink on the display.

How do you reset an indoor outdoor thermometer?

How long do AcuRite sensors last?

You can also verify if the Atlas sensor is receiving power by checking to see if the red light in the battery compartment of the Atlas sensor is flashing every 10 seconds. Verify that you are about to use a fresh set of batteries. The battery expiration date should be at least 6 years out.

How often does AcuRite thermometer update?

every 10-30 seconds

Why does my AcuRite thermometer not work?

If the temperature or humidity is inaccurate, please confirm the following: Make sure both the display unit and AcuRite Iris™ (5-in-1) sensor are placed away from any heat sources or vents. Make sure both the display unit and AcuRite Iris™ (5-in-1) sensor are positioned away from moisture sources.

Why does my AcuRite wireless thermometer beep?

This display features programmable alarms that sound an alert to notify you when a value (for time, temperature or humidity) has been reached or exceeded. When an alarm is triggered, the display emits an audible beep and flashes data in the affected category.

Why is my AcuRite outdoor temperature not working?

If the outdoor temperature is showing dashes or not changing the units may have lost connection or are experiencing interference. Verify that the A-B-C switch in the battery compartments of both the display and sensor are set to the same letter. You may choose A, B, or C; but both units must match to sync up.

Why is my AcuRite thermometer blinking?

Flashing of the outdoor temperature is generally an indication of wireless interference. 1. Bring both the sensor and display unit indoors and remove at least one battery from each.

Why is my outdoor thermometer not accurate?

If a thermometer isn’t protected from the elements, the reading will be inaccurate during weather events. Since weather-related events such as wind, snow, hail, and rain can occur frequently, an unprotected thermometer will be unreliable.

Leave a Comment