Are all sink strainers the same?

Kitchen sink basket strainers are the same size. The basket assembly can fit the sink drain opening every time. You don’t have to measure it, you don’t have to measure the size of your sink drain hole, this is the standard in the industry.

>> Click to read more <<

In this way, are all kitchen sink strainers the same size?

For nearly all kitchen sinks, the standard drain hole size is 3.5 inches, though some larger setups exist. Bar sinks have smaller drain holes sized between 1.875 (1 7/8) inches and 2.25 inches, though, again, some are larger. Sometimes strainers for bar sinks are sold under the term junior.

Simply so, are kitchen sink drains universal? Yes, kitchen sink drains today are universal. They’re generally 3 ½ inches in diameter and are larger than bathroom drains, which are 1 ¼ inch in diameter. Kitchen sink drains are the same size as most standard-sized shower drains.

Similarly, are kitchen sink strainers a standard size?

FITS STANDARD SINKS: The size of the basket strainer is 3.2 inch which can fit for most American standard kitchen sink drains with 3-1/2 inch drain hole.

How do I choose a kitchen sink strainer?

How do I know what size sink strainer I need?

Don’t worry whether the strainer can fit your sink drain or not. The standard drain opening size is 3-1/2”, and some are 4”. This deep cup strainer can cover from 3-1/2” to 4” drain openings. If you are still concerned about the size, measure the diameter of your sink drain opening like below.

How do I measure for a replacement sink strainer?

Insert the end of the measuring tape into the drain, beside the edge. Measure the depth of the opening. This gives you the maximum depth for the crumb cup. Don’t measure in the center of the drain — the bottom surface might slope, and you need to measure its shallowest point.

How do you install a sink strainer?

How do you put a sink strainer back together?

How do you take apart a sink drain stopper?

Once you have all the tools prepared and ready, here are the steps you should follow to remove the bathroom sink stopper.

  1. Try removing the stopper by hand. …
  2. Remove items from under the sink. …
  3. Locate the horizontal plunger rod. …
  4. Locate the clip attaching the rod and the strap. …
  5. Unscrew the pivot nut. …
  6. Remove the stopper.

How do you tighten a sink strainer nut?

How much does it cost to replace a kitchen sink strainer?

A plumber will charge $171 to install a new sink strainer in a sink. If you have plumbing skills and tools, you can buy the strainer for $30 and replace it and save 80 percent. You’ll need plumber’s putty, a putty knife, joint pliers, and a spud wrench.

Leave a Comment