What kind of saw do I need to cut Hardie board?

You can use a jigsaw, table saw or circular saw, or another tool, as long as it’s equipped with the right kind of blade. Once prepared, cut the Hardie board as you would any other material. Mark your line; align the board against the guard as needed and slowly but firmly make the cut.

>> Click to read more <<

Likewise, can I cut Hardie board with a jigsaw?

A jigsaw can cut straight cuts, rounded cuts, and is the best choice if you need to cut a circular piece or an irregular shape out of the cement board. Fit the jigsaw with a metal-cutting blade or a carbide-grit blade.

Then, can I use masonry blade to cut Hardie board? That’s a stone/tile/masonry cutting blade with a diamond ‘turbo’ rim. It will work for Hardie Backer board or similar fiber-cement products but it’ll make a lot of dust, and would almost certainly be awful at cutting any sort of wood or wood paneling – more likely to burn through than cut it.

Moreover, can you cut Hardie board with a masonry blade?

Also, what kind of saw blade do you need to cut Hardie board? To cut this type of siding, use a masonry blade. Masonry blade types include abrasive materials or vented diamond blades that are used for dry cutting. The blades are designed to be used with most cutting tools, including circular, table and miter saws.

Can you cut Hardie board with a wood blade?

There are a few different power tools that you can use to cut cement backer board. Again, these will produce lots of dust, so protect yourself with goggles and a respirator. For straight cuts, use a circular saw fitted with a carbide-tipped wood-cutting blade, pushing the saw into the material with slow, even pressure.

Can you use a regular saw blade in cement board?

Fit your circular saw with a carbide-tipped wood-cutting blade (view example on Amazon), choosing one with as few teeth as possible in order to minimize the amount of dust given off as you saw. Operate your circular saw as you typically would, pushing it slowly and evenly through your cement backer board.

Do you need a special saw blade to cut Hardie board?

You shouldn’t use a wood blade to cut Hardie or other fiber cement siding. The higher teeth-per-inch count creates more fine dust particles. This increases the installer’s exposure to respirable silica dust, which can lead to future health problems.

How do you cut and install Hardie board?

What do you cut Hardie board siding with?

What is the best way to cut Hardie board?

Leave a Comment