It can be cut and drilled just like wood. However, drilling through cement-fiber siding goes better if you use a carbide drill bit, as opposed to a regular steel drill bit. … Just remember that drilling before it is installed requires extra care to avoid breaking the strip.
Regarding this, can I use a hole saw on cement board?
To cut holes in cement backer board to use under tile, equip a portable jigsaw or sabre saw with a metal cutting blade. To start the saw in cement backer board, drill a hole though the backer board large enough for the jigsaw blade or make a plunge cut with the blade in the backer board.
For some types of Hardie board, you’ll need a power tool with a cement board blade with a carbide tip to cut the board. Carbide-tipped blades are made specifically for this kind of work. … Once prepared, cut the Hardie board as you would any other material.
Additionally, how do you cut holes in cement board siding?
Cement fiber siding (CFS) can be drilled, nailed and cut much like wood. Since it is more abrasive than wood, carbide or diamond blades are best for cutting. Holes are easy to make with an electric drill and a carbide tip drill bit. As with any project, good eye protection is recommended.
What kind of screws do you use for Hardie board?
James Hardie recommends 1-1/4” long galvanized or STAINLESS steel roofing nails or 1-1/4” long ribbed waferhead screws in compliance with the tile industry. It is 8-18 x 3/8” HD.