A grinder pump is a pump that’s located at the low spot in your house or in your yard. The pump grinds up the wastewater—much like a garbage disposal—and then pumps it up to the nearest municipal sewer line. The wastewater first gathers in a holding tank.
Keeping this in consideration, can a grinder pump handle tampons?
A sewage grinder pump can easily handle 2 inch solids, and will also be able to handle difficult artificial solids, like feminine hygiene products (pads, tampons, etc), rags, towels, diapers, diaper wipes, napkins, underwear, and a range of other things that shouldn’t be flushed down toilets but often are.
Similarly, does a sewage pump need a grinder?
Sewage Ejector pumps do not have grinding blades. They use a spinning that intakes the raw sewage through the bottom of the pump and forces it under pressure out of the outlet and into the discharge pipe. Sewage Ejector pumps are generally designed to handle up to 2” diameter solids.
How big is a grinder pump?
The grinder pump excavation is approximately 6 feet deep by 6 feet wide. The pressure sewer excavation is about 4 feet wide, with varying depth. These are typical dimensions, but are subject to change for each unique situation.
How do you maintain a grinder pump?
During your septic grinder pump maintenance routine, you should do the following:
- Inspect oil level and check for contamination in septic grinder pump motor chamber.
- Inspect pump impeller and body for any clogs or clotting (buildup).
- Inspect pump motor and bearings.
How do you unclog a grinder pump?
How long do grinder pumps last?
You can expect a sewage grinder pump to last 6 to 16 years, with an average of 9 years. A grinder pump is installed along the drain line to a municipal sewer system or private septic tank when the pipe slope is not enough to flow by gravity.
How much does a septic grinder cost?
Homeowner: How much does an E/One grinder pump cost? The cost of a completely installed system depends on the type of system you select, the soil conditions of your lot, and the distance from your grinder pump to the public sewer tap. Costs typically range from $3,000 to $6,000 installed.
How often do grinder pumps need to be replaced?
Grinder pumps do not need to be pumped out because they pump out the wastewater once the contents reach a certain level. Grinder pumps average eight years between service calls, so minimal regular maintenance is required when operated under normal conditions.
How often does a grinder pump run?
The pump is programmed to operate in cycles, rather than continuously. Cycles are determined by the amount of water used. Usually after 20 gallons have entered the tank, your grinder pump will turn on. On a typical day, this cycle will repeat itself 10 to 20 times.
What is difference between sewage pump and grinder pump?
Grinder pumps are a subtype of sewage pumps. Generally speaking, sewage pumps that are not grinder pumps can move sewage solids up to two inches in diameter that are easy to break down or dissolve. … However, a general sewage pump that is not a grinder pump is usually less expensive and draws less power.
What is the difference between a sewage ejector pump and a grinder pump?
The tradeoff is that grinder pumps can only pump low volumes of sewage. Sewage ejector pumps, on the other hand, can move high volumes of raw sewage (up to 200 gallons per minute) for distances under 750 feet. When picking a sewage pump system for your home, it’s best to consult with a professional sewage pump plumber.
Where is my grinder pump?
Grinder pumps are usually placed in a wastewater holding tank and buried on your property.