We’ve selected some of the top hardware styles for shaker cabinets, and what looks they will bring to your kitchen.
- Classic – Ceramic Knobs. …
- Elegant – Glass Knobs. …
- SIMPLE- brass/nickel knobs. …
- MODERN – tubular bar pulls. …
- Sleek – Flat Bar Pulls. …
- VINTAGE- bin pulls. …
- RETRO – latches. …
- INDUSTRIAL – pulls with exposed screws.
Considering this, can you mix knobs and pulls on kitchen cabinets?
You can coordinate knobs and pulls from different collections by choosing the same finish. But make sure the finish matches perfectly. Even slight variations will be noticeable.
Similarly, how Big Should cabinet knobs be?
Knobs that are 1 ¼” to 1 ⅜” are standard for most applications. Any knob that is 1 ½ inches or larger is generally used on larger cabinets or if someone is really trying to make their hardware stand out and look more dramatic.
How do you install knobs and pulls on cabinets?
How do you mount a front Shaker drawer?
How do you put drawer pulls on Shaker cabinets?
How long should Pulls be on cabinets?
While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
Should I use pulls or knobs on cabinets?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
What is the rule of thumb for cabinet hardware?
An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. … A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.
What size pulls for Shaker cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
Where do handles go on Shaker doors?
For 5-piece cabinets (like a Shaker or any style that isn’t one flat slab of wood), the traditional placement is to center the knob in the corner of the face frame, so that the knob is in the center of both the vertical and horizontal frame pieces.
Where do you put cup pulls on drawers?
Cup Pulls: Cup pulls are only ever used on drawers, and I like to center them in the middle of the drawer slab. If you have a 5 piece drawer (top and bottom rails, inside panel, and side rails) you want to make sure the hardware itself will fit (centered) in the middle panel before purchasing and installing.
Where do you put hardware on cabinets?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
Where should I put my cabinet pulls?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.