Medium-Fine Grind (pour over grind)
It’s finer than sand, but not as fine as an espresso grind. Suits these brew methods: Cone-shaped pour-over brewers (e.g. Hario v60, Kalita wave, etc) The Aeropress (with a 2-3 minute brew time)
Secondly, how do I remove Rancilio Rocky Doser?
Doser lever issues – Rancilio Rocky Doser
- Unplug the grinder.
- Remove beans from bean hopper and ground coffee from doser.
- Lay grinder on side on top of towel and remove the 3 screws from bottom base plate.
- Remove the 2 screws holding the fork and the 2 screws holding bottom doser cover.
- Replace the cam spring and screw.
People also ask, how do you calibrate a coffee grinder?
How do you clean a Rancilio grinder?
Rancilio Flat Burr Set – Rocky/D40/D50
Pick up this shiny new set for your Rancilio Rocky and keep on grinding friends. Sold as a set. 50mm. Fits Rancilio Rocky Doser Grinder, Rancilio Rocky Doserless Grinder and the Rancilio MD40 Grinder.
Burr And Motor Quality
Rancilio Rocky’s motor is a 166-watt direct-drive that offers plenty of power yet is quiet. It has 1725 RPM, meaning it’s fast and can grind around one gram per second. … As a good burr grinder for home baristas, the flat burrs and motor do a great job and they are a good starting point.
I would recommend that you trial the grinder at the setting 12. The aim is to get around 30ml of coffee extracted from your espresso machine in around 25-30 seconds. If the coffee pours out too quickly – adjust the grinder down a couple of notches (i.e 10) until you achieve a good extraction.
French press coffee calls for a coarse, even grind. We recommend starting with a 1:12 coffee-to-water ratio. If you’re using 350 grams of water, you’ll want 30 grams of coffee. To start, gently pour twice the amount of water than you have coffee onto your grounds.
Doserless coffee grinders dispense grounds directly into your container through a chute. You determine how much coffee is dispensed by manipulating the grinder’s power switch. That method gives you finer control over how much is dispensed, but requires you to know how much you need to grind with no way to measure.