How do I change the length of my p-touch label?

by

To change the length of the label, Continue pressing the Fn (Function) key until “Label Length” is displayed. Press the OK key. You can also use the number keys to type in the desired label length directly.

>> Click to read more <<

In respect to this, how do I change label size on Brother label maker?

To change the length of the label,

  1. Press the [Label] key ( / ).
  2. Press the [Cursor] key ( ) until [Label Length] is displayed.
  3. Press the [OK] key ( ).
  4. Press the [Cursor] key ( ) until your desired length is displayed. ( AUTO or 30 – 300 mm / 1.2″ – 12.0″) …
  5. Press the [OK] key ( ) to apply the setting.
Also to know is, how do I change the settings on my Brother label maker? How do I change the length of the label?

  1. Press the [Label] key ( / ). The current settings are displayed.
  2. Select the “Length” attribute using the or key, and then set a value using the or. key.
  3. Press the [OK] key ( ) or [Enter] key ( / ) to apply the settings.

Likewise, how do I reset my P-Touch label maker?

FAQs & Troubleshooting

  1. Turn off the P-touch.
  2. Hold down the “Shift” and the “R” keys.
  3. While holding down the “Shift” and the “R” keys, press the “On/Off” key or Power key once and then release the “Shift” and the “R” keys.
  4. “English” should be on the display. The machine has been initialised.

How do I shorten my brother p-touch labels?

After printing the last labels, hold down the SHIFT key and then press the PRINT (FEED) key to feed the tape, and then press the cutter lever to cut off the strip of labels.

2 Related Question Answers Found

How do I stop p-touch from wasting tape?

How to Keep a Brother P-Touch From Wasting Tape

  1. Press the Power key located on the upper left side of the device. …
  2. Type your label using the keyboard.
  3. Press the “Function” key, located in the center of the P-Touch.
  4. Press the right arrow key until “Length” appears on the display, then press the Return key.

What is tab length on label maker?

The tab length setting allows you to set tabs that are the same length and are measured from either the beginning of the line or the previous tab.

Leave a Comment