Natural and propane water heater gas valves are not interchangeable, so, be sure to order a valve for your type of gas.
Furthermore, how do I reset my Rheem gas valve?
Turn the water heater’s gas valve switch to the “OFF” position, wait for a few seconds and then flip the switch to the “ON” position to reset the system.
Moreover, how do you know if you have a bad heater control valve?
Symptoms of a Bad or Failing Heater Control Valve
- Heater doesn’t work. One of the first symptoms of a faulty heater control valve is a heater that fails to produce warm air. …
- Leaking coolant. Another common symptom of an issue with the heater control valve is coolant leaks. …
- Erratic heater behavior.
How do you replace a water heater control valve?
How do you test a heater control valve?
How Do You Test a Heater Control Valve?
- Bring the engine up to operating temperature and switch the heater to the hottest setting.
- Check the temperature of the valve’s outlet hose (between the valve and the heater core)—it should feel nearly as hot as the valve’s inlet hose.
How long does it take to replace a gas valve?
Replacing a valve is usually a straightforward job. It becomes more time consuming as furnace access gets more difficult. Up to 1 hour | Most gas valve replacements. 1 to 2.5 hours | Valve replacements in attics, crawlspaces and similar.
How much does it cost to get a gas valve replaced?
Universal gas valves are cheaper than brand name valves. With all this in mind, the price for a replacement job on a gas valve ranges from $195 to $870.
How much is a gas valve for water heater?
Cost of Parts
A new water heater gas valve costs between $100 and $250. It’s wise to purchase the part yourself, as this may be cheaper than buying from a pro.
How much is a water heater control valve?
Replacing a water heater gas control valve costs $150 to $600. The valve controls the flow of gas to the unit, allowing the pilot light to ignite and releasing gas to the burner to heat the water in the tank.
How much should a 50 gallon water heater cost installed?
Water heater installation cost
A new 40- to 50-gallon hot water heater costs $330 to $2,000 for the unit alone, plus the plumber labor cost to install is $200 to $1,000. Gas water heaters cost $100 to $700 more than electric to install. *Price ranges include materials and labor.
What does WC mean on a water heater?
W/C means water column. A measurement for very lower pressures. The 7 inches of W/C is the pressure into the gas control valve. The outlet side is usally 3.5 or 4.0 May be slightly higher in some instances.
What is the water heater control valve?
What Does A Water Heater Gas Control Valve Do? … The gas control valve allows the pilot to be ignited, and the lit pilot heats the thermocouple. Once the water heater thermocouple is heated, it sends a signal to the gas control valve which allows the burner to operate, heating the water in the tank.