|Cutting Depth||18″ (46 cm) below grade|
|Length||95″ (241 cm)|
|Transport Speed||4.5 mph (6.7 km/h)|
|Weight||1750 lb (794 kg)|
Herein, are there different sizes of stump grinders?
There are different size stump grinders ranging in power from 5 to 100 horsepower. Most smaller stump grinders only grind to ground level. If you want to plant grass after having a tree stump removed, then the stump will need to be grinding at least 6″ into the ground.
Secondly, how do you start a SGR 13 stump grinder?
Starting the Engine
- Move the fuel valve to the OPEN position, all the way to the right (Figure 9). …
- Move the choke lever to the ON position (Figure 9). …
- Move the throttle lever to the DISENGAGE position.
- Hold the safety bail against the handle and push the handle down enough to raise the cutting wheel off the ground.
How do you use a walk behind stump grinder?
How long will the stump grinding process take? For one stump, the process can take 15 minutes to 2 hours, depending on the size of the stump, the location, and more.
It uses 3 green teeth on the cutting head to grind stumps. This handheld stump grinder is light weighing in at 103 pounds.
$4,305.00. Call Kingline Equipment Today!
This grinder can cut 33 inches above grade and 12.5 inches below grade. The machine is 34 inches wide and weighs 1200lbs.
Walk-behind stump grinders are the smallest of the lot and most often range from 100 to 600 pounds (45.4 to 272.2 kilograms), although there are some larger models that weigh as much as 1,550 pounds (703 kilograms).
Professional Stump Grinding Prices
Our research shows that the average cost to grind a stump ranges from $100 to $400 per stump with an average price per diameter of $3. If you grind the stump yourself it may cost you as little as $75 to rent a stump grinder for half a day, or $250 to $400 for a full day.
Cost of Stump Grinder Machine
Buying a stump grinder costs between $1,450 to $19,830 or more, with most models available for less than $3,000. Grinders for construction or large commercial purposes could cost well over $100,000.
The Mini Skid Steer Stump Grinder is the choice for arborists, contractors, landscapers, and maintenance departments. This mini skid steer stump grinder is one of the most cost effective mini skid steer attachments on the market today. … Ultra strong carbide teeth aggressively chew through any size stump.
How big of a stump grinder do I need? If you have a stump that’s over 12″ in diameter, you will do best to consider a larger grinder. This is the kind that has to either be towed by a vehicle or one that is hauled on a large trailer.