Thereof, what is a commercial kitchen hood?
These hoods are designed for use over your grease-producing cooking equipment to collect oil-laden air for good sanitation and fire prevention. … Our hoods collect the grease particles produced by your kitchen equipment and trap it in baffle-type filters.
One may also ask, what is a plenum in HVAC?
Plenum boxes are usually situated on either side of the fan or heat exchanger and have the important function of bringing in, distributing, and removing air. They are the air’s first stop after being heated or cooled and its last stop before going back into your AC, heat pump, or furnace.
What is a Type 1 hood system?
Type 1 hoods are designed to be used with appliances that produce greasy by- products and smoke created while cooking. Type 1 hoods primarily deal with the removal of grease particles from the air they are often referred to as Grease Hoods.
What is a Type 2 kitchen hood?
Commercial cooking appliances which are used. in such facilities and which produce copious amounts of steam and. considerable smoke, or fumes, but not grease-laden vapors or copi- ous amounts of smoke, must be provided with at least a Type II hood”
What is a Type 2 vent hood?
Type II hoods are often called oven hoods or condensate hoods. They are not intended for use above grease producing appliances. Type II hoods are exhaust only hoods meant to remove heat, moisture, and odors and are primarily used over non-grease producing cooking appliances.
What is an exhaust plenum?
The Exhaust Plenum is used on GE radial Gas Turbines. The plenum essentially acts as an “enclosure” or Exhaust duct at the back of the Gas Turbine frame. This assembly aids in directing flow, left, right, or up to the downstream Exhaust system.
What is PSP plenum?
The Perforated Supply Plenum (PSP) shall provide make-up air through perforated stainless steel panels. … Perforated diffuser plates shall be included in the design and to provide even air distribution and the plenum shall be insulated to prevent condensation (optional).
What is the difference between Type 1 and Type 2 hoods?
Type 1 hoods are to be used with appliances that produce grease and smoke. … Type 2 hoods are to be used with appliances that produce only heat and steam and no grease or smoke. Such as dishwashers and pasta cookers.