Instructions for a Brother P Touch Label Maker
- Insert batteries into your Brother P Touch Label Maker. …
- Insert a new tape cassette into the cassette tape compartment on the bottom of the P Touch Label Maker. …
- Press and hold the “Code” and “Style” button simultaneously to set the font style.
Then, how do I change the label length on my Brother P Touch?
FAQs & Troubleshooting
- Press the [Label] key ( / ).
- Press the [Cursor] key ( ) until [Label Length] is displayed.
- Press the [OK] key ( ).
- Press the [Cursor] key ( ) until your desired length is displayed. ( AUTO or 30 – 300 mm / 1.2″ – 12.0″) …
- Press the [OK] key ( ) to apply the setting.
- Press the [Label] key ( / ). The current settings are displayed.
- Select the “Length” attribute using the or key, and then set a value using the or. key.
- Press the [OK] key ( ) or [Enter] key ( / ) to apply the settings.
In respect to this, how do I make my label shorter on my Brother label maker?
How do I create a small label?
- Press the [Function] key ( ).
- Press or. to select “Cut Option”.
- Press the [OK] key or [Enter] key ( / ).
- Press or to select “Small Margin”
- Press the [OK] key or [Enter] key to apply the settings.
How do I reset my Brother P-touch 1180?
Reset the label machine
- Turn off the label machine.
- Hold down the Code key and the Clear (BS) key.
- While holding down the keys, press the On/Off key once to turn on the label machine.
- Release the keys.
How do I reset my P-Touch label maker?
You can reset the internal memory of your P-touch when you want to clear all saved label files, or in the event the P-touch labeler is not operating correctly. Turn off the P-touch. While holding down the Shift and R keys, press the Power key to turn the P-touch back on. Release the Shift and R keys.
How do you fix a jammed Brother P Touch label maker?
Pull the tape cassette straight up from the tape cassette compartment. Some extra length of tape may come out from the tape cassette. Pull the jammed tape slowly to remove it from the printer. If you pulled out excessive length of tape, cut the tape with scissors only when the ink ribbon has not come out.
What is label length on label maker?
Note: The Length of a label can be set from 1.2 inch up to 12 inches; the default is Auto. Note: To return to Auto press the Space bar key (below the X key). In Auto the machine will automatically change the length to fit the text.
What is tab length on label maker?
The tab length setting allows you to set tabs that are the same length and are measured from either the beginning of the line or the previous tab.
Why is my label maker not printing?
Check to make sure nothing is obstructing the printing area, then make sure your cassette inside the label maker is correctly aligned and pushed all the way down into the compartment. If problem persists, follow the link below to the troubleshooting page.
Why is my P-touch label maker not working?
Replace the batteries with six new AAA alkaline batteries (LR03) or fully charged Ni-MH batteries (HR03). The P-touch resets to the default setting when more than 3 minutes pass after the batteries are removed, or the P-touch is disconnected from the AC adapter without using batteries.
Why isn’t my P-touch printing?
The P-touch label maker stops while printing a label. Replace the label tape cassette if striped tape is visible, as this indicates that you’ve reached the end of the tape. Replace all batteries or directly connect the AC adapter to the P-touch label maker.